Advertisement
(3) Detaching and refitting the inner tray
Procedure
1. Release the lock lever and then remove
the job separator tray.
ATTENTION: When refitting the Job
separator tray, are cautious of the posi-
tion of a paper guide.
2. Remove the rear cover.
(See page 1-5-4)
3. Remove the cassette.
(See page 1-5-8)
4. Open the front cover.
5. Remove six screws.
6. Pull the left lower cover upwards and
then release four hooks.
7. Remove the left lower cover.
Y116141-8
Paper guide
Screw
Screw
Screw
Screw
Left lower cover
1-5-5
Lock lever
Job separator tray
Figure 1-5-7
Screw
Screw
Hooks
Figure 1-5-8
Service Manual
2NP
Advertisement
