Advertisement
Item No.
U952
Method: [Execute(USB)]
1. Press the power key on the operation panel, and after verifying the main power indicator has
gone off, switch off the main power switch.
2. Insert USB memory in USB memory slot.
3. Turn the main power switch on.
4. Enter maintenance item U952.
5. Select [Execute(USB)].
6. Select the workflow.
WorkFlowData01 - 07
7. Press the start key.
Executes maintenance modes defined in a workflow in succession.
Method: [Entry(USB)]
1. Press the power key on the operation panel, and after verifying the main power indicator has
gone off, switch off the main power switch.
2. Insert USB memory in USB memory slot.
3. Turn the main power switch on.
4. Enter maintenance item U952.
5. Select [Entry(USB)].
6. Select the workflow.
WorkFlowData01 - 07
7. Select the work flow save area.
Data1 - 8
USB
8. Select [Execute].
Exports a workflow housed in a USB flash device to the machine.
Example
Registration is feasible when a USB flash device that stores the commands and text/mainte-
nance ID (editable) is inserted.
File Format: xxx.mwf
1.SET UP, 464, 469, 410, 000, 927, 278
2.WARRANTY, 089, 000
3.MK-A, 127, 901, 410, 251
4.MK-B, 410, 251
5.EH SET UP, 411, 034, 246
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Y116141-8
Display
Workflow data in the USB flash device
Display
Workflow data in the USB flash device
Display
The area to store workflows in the machine
USB memory
Description
Description
Description
Description
1-3-207
2NP-4
Service Manual
Advertisement
