Advertisement
Item No.
U237
Setting finisher stack quantity
Description
Sets the number of sheets of each stack on the main tray and on the middle tray in 1000-sheet
finisher.
Purpose
To change the setting when a stack malfunction has occurred.
Method
1. Press the start key.
2. Select the item to be set.
Middle Tray
Setting: [Middle Tray]
1. Change the setting using the +/- keys or numeric keys.
0
1
Initial setting: 0
Number of sheets of stack on the internal tray for non-staple copying: 10 sheets
2. Press the start key. The setting is set.
3. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
Service Manual
Display
Number of sheets of stack on the middle tray for staple mode
Display
Number of sheets of stack on the middle tray for staple mode
50 sheets
30 sheets
Description
Description
Description
1-3-102
2NP
Y116141-8
Advertisement
