Advertisement
Item
Output tray capacity
Continuous copying
Light source
Scanning system
Photoconductor
Image write system
Charging system
Developer system
Transfer system
Separation system
Cleaning system
Charge erasing system
Fusing system
CPU
Standard
Main mem-
ory (CPU)
Maximum
Standard
Interface
Option
Resolution
Temperature 10 to 32.5 °C/50 to 90.5 °F
Humidity
Operating
environment
Altitude
Brightness
Dimensions (W × D × H)
Weight
Space required (W × D)
Rated input
Options
Service Manual
Inner tray
: 250 sheets (80g/m
Job separator :
30 sheets (80g/m
1 to 999 sheets
White LED
Flat bed scanning by CCD image sensor
OPC drum (diameter 30 mm)
Semiconductor laser:
Contact charger roller method
Touch down developing system
Developer: 2-component
Toner replenishing: Automatic from the toner container
Primary: Transfer belt
Secondary: Transfer roller
Small diameter separation, separation electrode
Counter blade cleaning
Exposure by cleaning lamp (LED)
One axis IH established method
Heat source: IH inverter heating
Abnormally high temperature protection devices: thermostat
P1022PSE2HFB (800MHz)
3.5GB
(When the Document Processor (DP-772) is installed, 4GB.)
USB interface connector: 1 (USB Hi-speed)
USB host: 4 (USB Hi-speed)
Network interface: 1 (10BASE-T/100BASE-TX/1000BASE-T)
eKUIO slot: 2
600 × 600 dpi
15 to 80% RH
2,500 m/8,202 ft or less
1,500 lux or less
594 × 737× 745 mm / 23 3/8" × 29"× 29 5/16"
875 kg / 192.9lb (with toner containers)
873× 737 mm / 34 3/8" × 29" (using MP tray)
220 - 240 V AC, 50 Hz, more than 7.2 A
Document processor, Platen, 500x2 paper feeder, 3000-sheets deck,
Document finisher, Punch unit, Fax kit, Expanded memory for Fax, Gigabit
ethernet board, Wireless LAN interface, Thin print kit, Data security kit,
Internet FAX kit, Card Authentication kit, IC card reader holder, Document
guard kit, Document tray, Key counter, USB key board, Keyboard holder
1-1-2
Specifications
)
2
), 15 sheets (A3 duplex)
2
2NP-3
Y116141-8
Advertisement
