Advertisement
Item No.
U633
Setting communication control 4
Description
Makes settings for fax transmission regarding the communication.
Purpose
To reduce transmission errors when a low quality line is used.
Method
1. Press the start key.
2. Select the item to be set.
V.34
V.34-3429Hz
DIS 2Res
RTN Check
Setting:[V.34]
Sets whether V.34 communication is enabled/disabled for transmission and reception.
1. Select the setting.
Display
On
TX
RX
Off
* : Initial setting: On
2. Press the start key. The setting is set.
Setting:[V.34-3429Hz]
Sets if the V.34 symbol speed 3429 Hz is used.
1. Select the setting.
On
Off
* : Initial setting: On
2. Press the start key. The setting is set.
Y116141-8
Display
Enables or disables V.34 communication.
Sets the V.34 symbol speed (3429 Hz).
Sets the number of times of DIS signal reception.
Sets the reference for RTN signal output.
V.34 communication is enabled for both transmission and reception.
V.34 communication is enabled for transmission only.
V.34 communication is enabled for reception only.
V.34 communication is disabled for both transmission and reception.
Display
V.34 symbol speed 3429 Hz is used.
V.34 symbol speed 3429 Hz is not used.
Description
Description
Description
Description
1-3-177
2NP
Service Manual
Advertisement
