Advertisement
Item No.
U201
* : If the detecting values are not within
the setting values, pressed detecting
positions are displayed by red
points. And "Multi tap check Step 1"
button is displayed.
* : Select "Initialize" and press the Start
key to revert to "Initialize".
* : Select "Multi tap check Step 1" and
press the Start key to revert to "Multi
tap check ".
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Service Manual
Description
Initialize
Multi Tap Check
Step1
Multi Tap Check. Step 2.
Press both circles again.
Select "Multi Tap Check Step 1" and press the Start key to try again from Multi Tap Check Step 1.
If you need to perform initialization again, select "Initialize" and press the Start key.
Press the Stop key to complete the setting.
1-3-90
Step1 : Completed
Step2 : Not completed
Figure 1-3-31
Y116141-8
2NP
Advertisement
