Table of Contents
Advertisement
Symptom
The USB storage device
is not working properly.
The receiver switches to
Standby automatically.
9.0 TECHNICAL SPECIFICATIONS
Demodulator
Demodulation:
Input symbol rate:
Video Decoder
Profile level:
Aspect ratio:
Frame rate:
Video output:
Audio Decoder
Audio decoding:
Audio mode:
Audio support:
Transcoding for HDMI and S/PDIF:
* Dolby Digital Plus, Dolby Digital and the double-D symbol are registered trademarks of Dolby Laboratories
Tuner
Connector:
Tuner Chipset:
Input frequency range:
RF impedance:
Signal level:
LNB power:
DiSEqC version:
System and Memory
Main processor:
Connections
SAT IN
Cause
Formatted incorrectly.
Bigger sized HDD connected.
USB 1.1/3.0 device connected.
Auto Standby function is
activated and reached the
adjusted time (default 3h).
QPSK, 8PSK (Embedded in main-chipset MSD 7S75)
1 ~ 45 MBaud for DVB-S2
Inner code rate 1/2, 2/3, 3/4, 5/6, 7/8
QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
MPEG-4 H.264/AVC
4:3 and 16:9, Pan & Scan, Letterbox, Combined
PAL and NTSC
Scart: 576i, RGB, CVBS with CGMS-A
HDMI: 576i, 576p, 720p, 1080i, 1080p with HDCP
MPEG Layer 1 & 2, Dolby Downmix
Mono L/R, Stereo
Dolby Digital Plus*
Dolby Digital Plus to Dolby Digital
Type1 F Type, IEC169-24, Female
Integrated in main processor MSD 7S75
950 – 2150 MHz
75 Ohm unbalanced
-65 dBm ~ -25 dBm
13/18 V DC (+/- 1 V), 400 mA, overload protected
1.0, 1.1, 1.2, GOTO X and SatCR supported
MSD 7S75
Remedy
Format USB device by PC to FAT 32.
Bigger size HDD or HDDs with more
partitions might need longer time to be
detected.
The receiver might not work properly
with such an USB device respectively
functionality with all available USB
devices can't be guaranteed.
In the menu Settings >System Settings
you can adjust the Auto Standby time or
disable it.
27
Advertisement
Table of Contents
