Table of Contents
Advertisement
Password forgotten
The external USB HDD
does not start.
The receiver
switches to standby
automatically.
9.0 SPECIFICATIONS
Demodulator
Demodulation:
Input symbol rate:
FEC decoder:
Video Decoder
Input rate:
Aspect ratio:
Video resolution:
Audio Decoder
Audio decoding:
Audio mode:
Audio Support:
Sampling rate:
*Dolby Digital, Dolby Digital Plus and the double-D symbol are registered trademarks of Dolby Laboratories
Tuner
Type1:
Input frequency range:
RF impedance:
Signal level:
LNB power:
Switch versions:
LNB options:
Motor drive options:
System & Memory
Main processor:
The default password is 0000
The power consumption is too
high.
The Auto Standby function is
activated and has reached the set
time (default 3h).
QPSK, 8PSK
DVB-S QPSK: 1 ~ 45 Ms/s
DVB-S2 8PSK/QPSK: 10~30 Ms/s
Auto, 1/2, 2/3, 3/4, 5/6, 7/8 in DVB-S mode
1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 in DVB-S2 mode
3/5, 2/3, 3/4, 5/6, 8/9, 9/10 in 8PSK mode
Max. 20 Mbit/s
16:9 widescreen, Pillarbox, 4:3 Pan&Scan, Letterbox
PAL 50Hz: 576i, 576p, 720p, 1080i, 1080p
NTSC 60Hz: 480i, 480p, 720p, 1080i,1080p
MPEG-1 Layer 1 & 2, AC3, Dolby Digital Down mix, PCM
Mono L/R, Stereo,
E-AC3, Dolby Digital, Dolby Digital Plus*
32, 44.1, 48 kHz
F Type, IEC169-24, Female
950 – 2150 MHz
75 Ohm unbalanced
-65 to -25 dBm
13/18 V DC (+/- 5%), max. 0.5 A, overload protected
DiSEqC 1.0, 1.1
Universal, SatCR (max. 8 users)
DiSEqC 1.2, GotoX (DiSEqC 1.3)
MSTAR MSD7S01
Contact the local Service Hotline
or send an email to our support via
www.strong.tv
Connect an extra power supply
adapter to your USB HDD device.
Set the power down time or
disable it in the System Auto
Standby menu .
27
Advertisement
Table of Contents
