Table of Contents
Advertisement
No access to scrambled
services
The remote control does
not work
The USB storage device is
not working properly.
The receiver switches to
Standby automatically.
A.2 TECHNICAL SPECIFICATIONS
Demodulator
Demodulator chipset:
Demodulation:
Input symbol rates:
DVB-S/QPSK:
DVB-S2/QPSK:
DVB-S2/8PSK:
Video Decoder
Pro le level:
Aspect ratio:
Frame rate:
Video output:
Expired subscription.
ORF-DIGITAL-DIREKT not subscripted/
activated.
Receiver awaiting activation
respectively new authorisation.
No subscription for the selected
channel or activation not possible
The batteries of the remote control
are not inserted, wrongly inserted or
exhausted.
Formatted incorrectly.
Bigger sized HDD connected.
USB 1.1/3.0 device connected.
Auto Standby function is activated and
reached the adjusted time (default 3h).
M1501
QPSK, 8PSK
1 ~ 45 Msps for DVB-S and DVB-S2
1/2, 2/3, 3/4, 5/6, 7/8
1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
3/5, 2/3, 3/4, 5/6, 8/9, 9/10
MPEG-4 H.264/AVC
4:3 and 16:9, Pan & Scan, Letterbox, Combined
PAL and NTSC
Scart: 576i, RGB, CVBS with CGMS-A
HDMI: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p with HDCP
Check your current subscription status
in CA Menu Product Status together
with your service provider.
To enjoy the complete range of
channles and to watch your preferred
scrambled services, please register with
the enclosed registration form at ORF-
DIGITAL-DIREKT.
If you have further questions about
your registration, you can directly
contact the ORF-DIGITAL-Service-
Hotline (0800 700 600). Please have
your Device-ID (Gerätenummer) ready.
When receiver was switched o /
disconnected from signal for longer
it can take about 1-2 h until a valid
subscription is activated again.
Switch to another channel respectively
remove channels (which cannot be
activated) from the channel list
Check whether the batteries are
inserted correctly or exhausted, if so
replace the batteries in the remote
control.
Format USB device by PC to FAT 32.
Bigger size HDD or HDDs with more
partitions might need longer time to
be detected.
The receiver might not work properly
with such an USB device respectively
functionality with all available USB
devices can't be guaranteed.
In the menu Settings System Settings
you can adjust the Auto Standby time
or disable it.
28
Advertisement
Table of Contents
