Table of Contents
Advertisement
Problem
Some HDTVs cannot
display the entire picture
The receiver switches
off after 3 hours of no
commands of the remote
control
Forgotten your PIN code
The external USB HDD
does not start.
Timeshift intermittent
playback
A recording does not start
9.0 TECHNICAL SPECIFICATIONS
Tuner
Demodulator mode:
Frequency range:
Video decoder
Video decoding:
Aspect ratio:
Video resolution:
Video file formats:
Audio decoder
Audio decoding:
Audio mode:
* Dolby and the double-D symbol are registered trademarks of Dolby Laboratories
System & Memory
Android Version:
Chipset:
22
Possible reason
The power saving Auto standby
function is activated
Default PIN is 1234
The power consumption is
too high.
Too many USB devices
connected
HDD is not selected in the
menu
DVB-T HD, DVB-T2/QPSK,16QAM,64QAM,256QAM
VHF 174~230 MHz
UHF 470~862 MHz
MPEG-4/ H.264/H.265(HEVC) ASP@L5 up to 1080p@60fps
(max 30 Hz)
Auto, Full Screen
1080p, 1080i, 720p
mkv, wmv, mpg, mpeg, dat, avi, mov, iso, mp4, rm, jpg, bmp, gif
Dolby® Digital/ Dolby® Digital Plus*, WMA, WMA Pro, WMV,
MPEG, OGG, GA, FLAC, ALAC
Mono L/R, Stereo
4.4.2 "KitKat"
Amlogic S805 Quad Core
Remedy
Setup the screen ratio on your
HDTV as automatic or change the
screen size in the system menu.
Switch the Auto standby function
off, if you don't like it.
Contact your local Service Hotline
or send an email to our support
via www.strong.tv
Connect an extra power supply
adapter to your USB HDD device.
Disconnect e.g. the USB camera
Select the recording device in the
PVR settings menu.
Advertisement
Table of Contents
