Table of Contents
Advertisement
6.0 OPERATION
Your new receiver is equipped with several features to make watching TV a true pleasure. This
paragraph describes these features. Please also read chapter 7.0 to get familiar with the menu of your
receiver.
6.1 Changing channels
Your new receiver is equipped with four ways to change channels.
Via direct access using the 0~9 buttons.
„
Via the channel list trough OK button.
„
Via the PG+ and PG- keys.
„
Via the pq keys.
„
6.1.1 Direct access via 0~9 buttons
To gain direct access to a certain channel, simply input its number with the 0~9 keys on the remote
control. Channel numbers can be up to four digits long. Entering a number with less than four digits
is possible. Just wait a few seconds and your receiver will switch to the selected channel or press OK
immediately after selecting the channel number.
6.1.2 Channel list
Press OK in viewing mode to display the Channel List. Use pq in the Channel List to highlight your
channel of choice and press OK once to select the highlighted channel.
TIP:
6.1.3 Using the
pq
p switches to the next channel.
q switches to the previous channel.
PG+ switches to the next 10 channels.
PG- switches to the previous 10 channels.
6.2 Info Banner
While watching TV you can press the INFO button any time to get information about the current
channel and event*. Press INFO twice for programme information and some technical details about
the current channel.
* Event information is displayed when available. Availability depends on broadcast.
6.3 Selection of audio language
Some channels support a choice of audio formats and/or languages. To select another audio stream,
press AUDIO in viewing mode. A list with available audio streams will now be displayed. Use pq to
select the desired stream and confirm with OK.
10
Use t u to toggle between the TV List and Radio List, press FAV for a list of
available favourite lists, toggle between them, also with t u.
or PG+/PG- keys
Advertisement
Table of Contents
