Table of Contents
Advertisement
6.1.1 Direct access
To gain direct access to a certain channel simply enter its number with the 0~9 keys on the remote control.
Channel numbers can be up to 4 digits long. Entering numbers and values with less than 4 digits is possible.
Just wait a few seconds and your receiver will switch to the selected channel.
6.1.2 Channel list
Press OK or the LIST button in viewing mode to display the channel list.
Use p q to highlight your channel of choice and press OK to select the highlighted channel for preview.
Use the FAV button to get access to a group of favourite lists. Press OK to select only channels from a
particular list. Refer to chapter 7.1.1 TV Manager to organize channels into favourite lists.
Use the t u button to get access to TV, Radio list or group of satellites, which channels were stored to
receiver during installation procedure. Press OK to select only channels from particular satellite.
6.1.3 Using the CH+/- or
CH+ or p will switch to a higher channel.
CH- or q will switch a lower channel.
6.1.4 Using the button
Use the button to return to the last viewed channel.
6.2 Volume Control
The volume control allows you to adjust the audio volume. Press VOL+/ or t u button to adjust the audio
volume. Press the ! button to temporarily mute audio. Press it again to come back to normal volume.
NOTE:
The MUTE function remains set while you switch channels.
6.3 Programme Information (Info banner)
Programme information is always displayed for a certain period of time whenever you switch channels.
You can also view the programme information by pressing the INFO button while watching a programme.
Pressing again INFO will display exstened EPG and technical details as signal levels.
Press
to hide the info banner.
Info banner:
„ Indicates channel number and name
„ Indicates current time and date
„ Informs about current programme name
„ Indicates name and schedule of the next programme
„ Displays satellite signal strength and quality bars
„ Displays age information for parental controll protection.
„ Provides video and audio parameters for broadcasted programme
„ Provides subtitle and teletext information (displayed if available with the programme broadcast).
Use the p q buttons of the remote control to scroll information through previous/next channel
information for current time.
* Information will be displayed if available. Availability depends on the broadcaster.
6.4 Selecting audio language
Some channels support a choice of audio formats and/or languages.
Press AUDIO in viewing mode to display audio languages banner.
Use t u to select the language of choice.
p q
buttons
15
Advertisement
Table of Contents
