Actiondevicekey; Actiongroupkey - Baumer CX Series Operating Manual

Baumer
Example: Triggering multiple cameras
The following illustration shows three cameras with synchronous trigger by software application.
11.2.1

ActionDeviceKey

Provides the device key that allows the device to check the validity of action commands. The
device internal assertion of an action signal is only authorized if the ActionDeviceKey and the
action device key value in the protocol message are equal.
Name
Category
Interface
Access
Unit
Values
11.2.2

ActionGroupKey

Provides the key that the device will use to validate the action on reception of the action proto-
col message.
Name
Category
Interface
Access
Unit
Values
V1.1 | VCXG.2 / VCXG.2.XC / VCXG.2.I / VCXU.2
ActionDeviceKey
ActionControl
IInteger
Write only
HexNumber
0 - 4294967295 (Increment: 1)
ActionGroupKey
ActionControl
IInteger
Read / Write
HexNumber
0 - 4294967295 (Increment: 1)
GenICam Camera Features
Operating Manual
| 11
87