Timestamplatchvalue; Usb2Supportenable (Usb Cameras Only) - Baumer CX Series Operating Manual

Baumer
11.9.41

TimestampLatchValue

Returns the saved value of counter Timestamp.
Name
Category
Interface
Access
Unit
Values
11.9.42

USB2SupportEnable (USB cameras only)

Enable or disable the streaming support for USB 2.0.
NOTICE
Activation of the image transmission with USB2 connection
If the camera is connected to an USB 2.0 port image transmission is disabled by default. The
camera consumes more than 2.5W which is the maximum allowed by the USB 2.0 specification.
But there is a possibility to activate the image transmission at your own risk!
This activation could damage your computer´s hardware!
Steps to enable image transmission
Instruction:
a) Open the camera in Camera Explorer.
b) Select profile GenICam Guru (only Camera Explorer < v3.0).
c) Enable the feature USB2SupportEnable in category DeviceControl.
d) Disconnect the data connection of the camera to the USB 2.0 port.
e) Connect the data connection of the camera to the USB 2.0 port.
Result:
ü
Images will be transmitted via the USB 2.0 port.
Name
Category
Interface
Access
Unit
Values
V1.1 | VCXG.2 / VCXG.2.XC / VCXG.2.I / VCXU.2
TimestampLatchValue
DeviceControl
IInteger
Read only
ns
0 ... 9223372036854775807 (Increment: 8 (GigE) / 10 (USB))
USB2SupportEnable
DeviceControl
IBoolean
Read / Write
-
true = 1 (On)
false = 0 (Off)
GenICam Camera Features
Operating Manual
| 11
129