Cooling Channel (Vcxg.2.Xc Only) - Baumer CX Series Operating Manual

5 | Installation
5.4.1

Cooling channel (VCXG.2.XC only)

The camera features a housing-integrated cooling channel. This is to feed compressed air or
tempering fluid for camera temperature control.
For compressed air / tempering fluid connection (inlet (1) / outlet (2)) use male threaded M3
push-in fittings and plastic hoses, e.g. FESTO QSM-M3-3-I and FESTO PUN-H-3x0.5.
1
1 Cooling channel (inlet)
Cooling with air
The camera was tested with compressed air at 3 bar according to ISO 8573-1:2010 [1:4:2] [Par-
ticle:Water:Oil]. Maximum permitted pressure is 6 bar.
1 cold air
3 Cooling channel (inlet)
5 warm air
Compressed air contamination and cleanliness classes (ISO 8573-12010)
Class
0
1
2
3
4
5
6
7
32
2
4
3
Particle
According to particle size
(maximum total of particles per m³)
0.10 - 0.5 0.5 - 1.0
microns microns
As specified by user or supplier and more stringent than Class 1
≤ 20,000 ≤ 400
≤ 400,000 ≤ 6,000
- ≤ 90,000 ≤ 1,000
- -
- -
- -
- -
Operating Manual
2 Cooling channel (outlet)
5
2 1
2 Compressor
4 Cooling channel (outlet)
According
to mass
1.0 - 5.0 mg/m³
microns
≤ 10 -
≤ 100 -
-
≤ 10,000 -
≤ 100,000 -
- 0 - ≤ 5
- 5 - ≤ 10
VCXG.2 / VCXG.2.XC / VCXG.2.I / VCXU.2 | V1.1
Water
Dew point Fluid
°C °F g/m³
≤ -70 ≤ -94 -
≤ -40 ≤ -40 -
≤ -20 ≤ -4 -
≤ +3 ≤ +37 -
≤ +7 ≤ +45 -
≤ +10 ≤ +50 -
- - ≤ 0.5
Baumer
Oil
Fluid,
aerosol and
vapor
mg/m³
≤ 0.01
≤ 0.1
≤ 1
-
-
-
-