Countervalue; Countervalueatreset; Framecounter - Baumer CX Series Operating Manual

Baumer
11.7.8

CounterValue

Reads or writes the current value of the selected Counter. Writing to CounterValue is typically
used to define the start value.
Name
Category
Interface
Access
Unit
Values
11.7.9

CounterValueAtReset

Reads the value of the selected Counter when being reset by trigger or explicit CounterReset
command.
It represents the last Counter value saved before Counter reset.
Name
Category
Interface
Access
Unit
Values
11.7.10

FrameCounter

FrameCounter is part of Chunk (Baumer Image Info Header) and added to every frame if Chunk
Mode is enabled. It is generated by the hardware and can be used to verify that each of the
camera's images is transmitted to the PC and received in the right order.
FrameCounter can be set to a defined value by writing it into the FrameCounter.
Name
Category
Interface
Access
Unit
Values
V1.1 | VCXG.2 / VCXG.2.XC / VCXG.2.I / VCXU.2
CounterValue
CounterAndTimerControl
IInteger
Read / Write
-
0 ... 65535 (Increment: 1)
CounterValueAtReset
CounterAndTimerControl
IInteger
Read only
-
0 ... 65535 (Increment: 1)
FrameCounter
CounterAndTimerControl
IInteger
Read / Write
-
0 ... 4294967295 (Increment: 1)
GenICam Camera Features
Operating Manual
| 11
113