Frame Transmission Delay - Baumer CX Series Operating Manual

Baumer
13.3

Frame Transmission Delay

Another approach to packet management in multicamera operation is the so-called Frame
Transmission Delay. Saving the currently acquired image to the camera and starting transfer at
the predefined delay enables transfer of all frames at once to the PC.
For process-specific reasons, all cameras will end image acquisition at the same time. The cam-
eras now try not transmitting their images simultaneously, but - according to the specified trans-
mission delays - one after the other. In this case, the first camera starts immediate transmission
at "0" delay.
The following scenario is an example:
V1.1 | VCXG.2 / VCXG.2.XC / VCXG.2.I / VCXU.2
GigE interface functionality
Operating Manual
| 13
213