Gevprimaryapplicationsocket; Gevprimaryapplicationswitchoverkey; Gevscda; Gevscftd - Baumer CX Series Operating Manual

Baumer
11.17.2.27

GevPrimaryApplicationSocket

Returns the UDP source port of the primary application.
Name
Category
Interface
Access
Unit
Values
11.17.2.28

GevPrimaryApplicationSwitchoverKey

Controls the key to use to authenticate primary application switchover requests.
Name
Category
Interface
Access
Unit
Values
11.17.2.29

GevSCDA

Controls the destination IP address of the selected stream channel to which a GVSP transmitter
must send data stream or the destination IP address from which a GVSP receiver may receive
data stream.
Name
Category
Interface
Access
Unit
Values
11.17.2.30

GevSCFTD

This feature indicates the delay (in timestamp counter unit) to insert between each block (im-
age) for this stream channel.
Name
Category
Interface
Access
Unit
Values
V1.1 | VCXG.2 / VCXG.2.XC / VCXG.2.I / VCXU.2
GevPrimaryApplicationSocket
TansportLayerControl → GigEVision
IInteger
Read only
-
≥ 0
GevPrimaryApplicationSwitchoverKey
TansportLayerControl → GigEVision
IInteger
Write only
-
≥ 0
GevSCDA
TansportLayerControl → GigEVision
IInteger
Read / Write
-
≥ 0
GevSCFTD
TansportLayerControl → GigEVision
IInteger
Read / Write
-
0 ... 4294967295 (Increment: 1)
GenICam Camera Features
Operating Manual
| 11
195