Category: Usersetcontrol; Usersetdefault; Usersetfeatureenable; Usersetfeatureselector - Baumer CX Series Operating Manual

11 | GenICam Camera Features
11.18

Category: UserSetControl

Category including features for User Sets control. It allows loading or saving factory or user-de-
fined settings.
Loading the factory default User Sets guarantees a state enabling continuous acquisition start
by the mandatory features only.
These User Sets are stored to the camera and can be loaded, saved and transferred to other
cameras.
11.18.1

UserSetDefault

Four User Sets are available for this camera. User Set 1, User Set 2, User Set 3 are user-spe-
cific and can contain user-definable parameters.
The factory settings are stored in the User Set: Default. This is the only User Set that cannot be
edited.
Name
Category
Interface
Access
Unit
Values
11.18.2

UserSetFeatureEnable

Activates the feature selected with UserSetFeatureSelector.
Name
Category
Interface
Access
Unit
Values
11.18.3

UserSetFeatureSelector

Selects which individual feature is to be controlled.
Name
Category
Interface
Access
Unit
202
UserSetDefault
UserSetControl
IEnumeration
Read / Write
-
Default
User Set 1
User Set 2
User Set 3
UserSetFeatureEnable
UserSetControl
IBoolean
Read only
-
true = 1 (On)
false = 0 (Off)
UserSetFeatureSelector
UserSetControl
IEnumeration
Read / Write
-
Operating Manual
Select the factory predefined User Set.
Select the User Set 1 (available when saved).
Select the User Set 2 (available when saved).
Select the User Set 3 (available when saved).
VCXG.2 / VCXG.2.XC / VCXG.2.I / VCXU.2 | V1.1
Baumer