11
|
GenICam Camera Features
11.1.8
AcquisitionStatusSelector
Selects the internal acquisition signal to be read using AcquisitionStatus.
Name
Category
Interface
Access
Unit
Values
11.1.9
AcquisitionStop
Stops the acquisition of the device at the end of the current frame.
Name
Category
Interface
Access
Unit
Values
11.1.10
ExposureAuto
Sets the automatic exposure mode for ExposureMode = Timed. The exact algorithm used for
implementation is device-specific.
Name
Category
Interface
Access
Unit
Values
78
AcquisitionStatusSelector
AcqusitionControl
IEnumeration
Read / Write
-
Acquisition Ac-
tive
Acquisition Trig-
ger Wait
AcquisitionStop
AcqusitionControl
ICommand
Write only
-
-
ExposureAuto
AcqusitionControl
IEnumeration
Read / Write
-
Continuous
Off
Once
Operating Manual
Device is currently doing an acquisition of one or many frames.
Camera awaits Trigger to acquire a single or several images.
The camera is continuously adapting the exposure time for
maximized dynamic range.
Exposure time is user-controlled using ExposureTime.
Exposure time is adapted once. Once converged, the camera
will go back to off state Off.
VCXG.2 / VCXG.2.XC / VCXG.2.I / VCXU.2 | V1.1
Baumer