16Linestatus; 17Linestatusall; 18Useroutputselector - Baumer CX Series Operating Manual

Baumer
11.10.16 LineStatus
Returns the current status of the selected Input or Output.
Name
Category
Interface
Access
Unit
Values
11.10.17 LineStatusAll
Returns the current status of all available Line signals at time of polling in a single bitfield.
Name
Category
Interface
Access
Unit
Values
11.10.18 UserOutputSelector
Selects which bit of the User Output register will be set by UserOutputValue.
Name
Category
Interface
Access
Unit
Values
V1.1 | VCXG.2 / VCXG.2.XC / VCXG.2.I / VCXU.2
LineStatus
DigitalIOControl
IBoolean
Read only
-
true = 1 (On)
false = 0 (Off)
LineStatusAll
DigitalIOControl
IInteger
Read only
-
Devices-Specific (HexNumber)
UserOutputSelector
DigitalIOControl
IEnumeration
Read / Write
-
UserOutput1 Selects the bit 0 of the User Output register.
UserOutput2 Selects the bit 1 of the User Output register.
UserOutput3 Selects the bit 2 of the User Output register.
UserOutput4 Selects the bit 3 of the User Output register.
GenICam Camera Features
Operating Manual
| 11
141