Devicereset; Deviceresettodeliverystate; Devicesfncversionmajor - Baumer CX Series Operating Manual

Baumer
11.9.13

DeviceReset

Resets the device to its power up state.
INFO
The execution of this feature may take several seconds.
Name
Category
Interface
Access
Unit
Values
11.9.14

DeviceResetToDeliveryState

By executing this feature, the camera is set to the factory settings.
INFO
The camera-stored settings (e.g. UserSets) will be lost.
Name
Category
Interface
Access
Unit
Values
11.9.15

DeviceSFNCVersionMajor

Primary version of Standard Features Naming Convention used to create the device GenICam
XML(X.x.x).
Name
Category
Interface
Access
Unit
Values
V1.1 | VCXG.2 / VCXG.2.XC / VCXG.2.I / VCXU.2
DeviceReset
DeviceControl
IComand
Write only
-
-
DeviceResetToDeliveryState
DeviceControl
IComand
Write only
-
-
DeviceSFNCVersionMajor
DeviceControl
IInteger
Read only
-
0 ... 9223372036854775807 (Increment: 1)
GenICam Camera Features
Operating Manual
| 11
121