Category: Colortransformationcontrol (Color Cameras Only) - Baumer CX Series Operating Manual

11 | GenICam Camera Features
VCXU.2
Values (Features)
Binning (BinningHorizontal, BinningHorizon-
talMode, BinningSelector, BinningVertical, Bin-
ningVerticalMode)
BlackLevel
CounterValue
DeviceTemperature
ExposureTime
FrameID
Gain
Height
Image
11.6

Category: ColorTransformationControl (color cameras only)

Category that contains the color transformation control functions.
The color processing is realized by 4 modules.
The sensor color signals r (red), g (green) and b (blue) are amplified in total and digitized within
the Camera Module.
Within the Bayer Processor, the raw signals r', g' and b' are amplified by color-channel- specific
factors. Next is interpolating the missing color values which will generate new ones (r'', g'', b'').
Color Transformation is next. Here, the previously generated color signals r'', g'' and b'' are con-
verted to optimized RGB (color adjustment as physical balance of the spectral sensitivities).
106
r r'
g Camera g'
Module
b b'
White balance
Operating Manual
ImageControl (BrightnessCorrection, Defect-
PixelCorrection, LUTSelector, LUTEnable, Re-
verseX, ReverseY)
LineStatusAll
OffsetX
OffsetY
PixelFormat
SequencerSetActive
Timestamp
Width
r''
Color-
Bayer
Transfor-
g''
Processor
mation
b''
VCXG.2 / VCXG.2.XC / VCXG.2.I / VCXU.2 | V1.1
Baumer
RGB