Table of Contents
Advertisement
2.2
Technical Support
This manual is intended to provide an authorized, fully trained installation technician with the
information and guidance necessary to safely install the GSE SVS100 equipment.
All non-standard tools are listed in 2.4. If parts or tools are needed in addition to those listed in
this manual to perform service, this service is outside the scope of this manual and Webasto
should be contacted directly for further assistance.
Training may be scheduled by contacting Customer Service at Webasto at:
2.3
List of Provided Equipment
Equipment Description
GSE SVS100
Kit, Installation, Burton Connector,SVS
Cable Management Pole Assy
Cable Management Pole and Pogo
Stick
2.4
Non-StandardTools
No.
Equipment Description
A.
Multimeter
B.
Bleed down resistor (300, 10W)
with alligator clips
Hex wrench set, SAE, 1/8" to 3/8"
C.
D.
GSE SVS 100 Diagnostic Cable
2.5
ESD Precautions
Electronic circuits are sensitive to damage from electrostatic Discharge. Persons servicing this
equipment should be trained in proper techniques for avoiding ESD damage to electronic
circuits. As a minimum, when handling circuit boards, wear an appropriate ESD wrist strap
connected to the equipment chassis.
23435-W-03-01
SVS100 Installation, Operation and Maintenance Manual
(866) 767-4242
E-mail:
info@posicharge.com
Quantity
Number
1
1
1
1
Suggested Supplier
Fluke
Webasto Charging
Systems, Inc.
---
Webasto Charging
Systems, Inc.
9
Part
Comments
11000
11290
07233
Optional
09258
Optional
Webasto Charging Systems, Inc.
Part Number
Model 79 or
equivalent
---
06969
Advertisement
Table of Contents
