DVS Fast Charging System
Do not install unit near flammables.
Do not block or filter airflow to the unit (allow minimum of 6" clearance around unit).
Ensure that the BMID is properly installed according to the BMID installation instructions.
Replace blown fuses only with same type and rating of fuse.
Do not overload building wiring - be sure power supply system is properly sized, rated and
protected to handle this unit. Use only on circuits provided with the minimum wire size
specified in the installation section.
2.3 Technical Support
Call us for technical support any time a procedural question arises. DO NOT perform a
procedure you do not understand. The service desk can be contacted during normal working
hours (Pacific Standard Time) by contacting Customer Service at:
23411-W-03-01
info@posicharge.com
866-POSICHARGE (866-767-4242).
Page 8 of 29
Webasto Charging Systems, Inc.