Download Print this page

Advertisement

Huawei OptiXstar HG8145X6-10
Quick Start for QR code
Issue
01
Date
2023-04-14
HUAWEI TECHNOLOGIES CO., LTD.

Advertisement

loading
Need help?

Need help?

Do you have a question about the OptiXstar HG8145X6-10 and is the answer not in the manual?

Questions and answers

Mohamed
May 8, 2025

How can I have 200 mbps on the Ethernet ports of the hg8145x6-10

1 comments:
Mr. Anderson
May 19, 2025

To achieve 200 Mbps on the Ethernet ports of the Huawei HG8145X6-10:

1. Ensure your Ethernet cable supports at least 1000 Mbps (Cat 5e or higher).
2. Connect the Ethernet cable from the router’s Ethernet port to a device that supports 200 Mbps or higher.
3. Confirm that the connected device's network card is configured for auto-negotiation or set to 1 Gbps full duplex.
4. Make sure your internet plan supports speeds of 200 Mbps or more.
5. Avoid using network switches or hubs that limit speed below 200 Mbps.

The router supports up to 1 Gbps Ethernet, so 200 Mbps is achievable with proper setup.

This answer is automatically generated

Rene
August 4, 2025

Necesito la mac para configurar a internet

User image 68912440050b3
Eric Nkrumah Cheremeh
June 23, 2025

parental control on restricting webside oHG8145X6-10n

Antonio
June 7, 2025

How can I open port on this device?

Summary of Contents for Huawei OptiXstar HG8145X6-10

  • Page 1 Huawei OptiXstar HG8145X6-10 Quick Start for QR code Issue Date 2023-04-14 HUAWEI TECHNOLOGIES CO., LTD.
  • Page 2 Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...
  • Page 3: Table Of Contents

    Huawei OptiXstar HG8145X6-10 Quick Start for QR code Contents Contents 1 Placing the Device........................1 2 Connecting Cables........................4 3 Indicator Description......................6 4 Technical Specifications......................8 5 FAQs............................9 Issue 01 (2023-04-14) Copyright © Huawei Technologies Co., Ltd.
  • Page 4: Placing The Device

    ● It is recommended that the computer and ONT be put far away from electric appliances that generate strong magnetic or electric fields, such as microwave ovens. Mounting an ONT on the desk The figure below shows an ONT that is horizontally placed on a desk. Issue 01 (2023-04-14) Copyright © Huawei Technologies Co., Ltd.
  • Page 5 Use a screwdriver to fasten the screws into the expansion bolts, reserving 5 mm ends out of the wall, and mount the ONT onto the screws. Issue 01 (2023-04-14) Copyright © Huawei Technologies Co., Ltd.
  • Page 6 1 Placing the Device NO TE It is recommended that the screw be about 4 mm in diameter and longer than 20 mm. The screw head should be between 6mm and 9mm in diameter. Issue 01 (2023-04-14) Copyright © Huawei Technologies Co., Ltd.
  • Page 7: Connecting Cables

    Huawei OptiXstar HG8145X6-10 Quick Start for QR code 2 Connecting Cables Connecting Cables Issue 01 (2023-04-14) Copyright © Huawei Technologies Co., Ltd.
  • Page 8 NOTE Reset Huawei ONTs with caution. Otherwise, the ONTs may fail to access the Internet. If an ONT cannot access the Internet after a reset, contact your Internet service provider.
  • Page 9: Indicator Description

    Data is being transmitted on the USB port. The system is not powered on or the USB port is not connected. WLAN Steady on The WLAN function is enabled. Blinking Data is being transmitted on the WLAN port. Issue 01 (2023-04-14) Copyright © Huawei Technologies Co., Ltd.
  • Page 10 Blinks once The hardware is faulty. every 2 every 2 seconds seconds NO TE If the ONT is not powered on or the power switch is turned off, all indicators are off. Issue 01 (2023-04-14) Copyright © Huawei Technologies Co., Ltd.
  • Page 11: Technical Specifications

    Ambient humidity: 5%–95% (non-condensing) ● Dimensions (H x W x D): 35 mm x 155 mm x 105 mm ● Weight: About 246 g ● Maximum system power consumption: 12 W Issue 01 (2023-04-14) Copyright © Huawei Technologies Co., Ltd.
  • Page 12: Faqs

    ● Wireless login Connect your mobile phone, pad, or PC to the Wi-Fi network of the Huawei ONT. Enter the IP address in the address box of a browser and press Enter. On the displayed login page, enter the username and password.
  • Page 13 ● Change the initial password after logging in to the web page for the first time. How do I change the Wi-Fi password? Log in to the Huawei ONT web page using your mobile phone, pad, or PC. For details, see "How do I log in to the Huawei ONT web page?"...
  • Page 14 5 FAQs What can I do if I cannot connect to the Wi-Fi network? How to improve the Wi-Fi speed of a Huawei ONT? 1. Wi-Fi speed relies on the bandwidth provided by the ISP, so the simplest way is to upgrade to faster broadband.
  • Page 15 How do I restore the Huawei ONT to factory setting? Press Reset by using a needle-type object for longer than 10s to restore factory defaults and reset the Huawei ONT. If the indicator is off and then is lit, the system restarts successfully.

This manual is also suitable for:

Optixstar hg8145x6
Save PDF