Related Manuals for Huawei EchoLife EG8041V5
Summary of Contents for Huawei EchoLife EG8041V5
- Page 1 EchoLife EG8041V5 Quick Start for QR code Issue Date 2022-09-15 HUAWEI TECHNOLOGIES CO., LTD.
- Page 2 Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...
-
Page 3: Table Of Contents
EchoLife EG8041V5 Quick Start for QR code Contents Contents 1 Placing the Device........................1 2 Connecting Cables........................4 3 Indicator Description......................6 4 Technical Specifications......................8 5 FAQs............................9 Issue 01 (2022-09-15) Copyright © Huawei Technologies Co., Ltd. -
Page 4: Placing The Device
● It is recommended that the computer and ONT be put far away from electric appliances that generate strong magnetic or electric fields, such as microwave ovens. Mounting an ONT on the desk The figure below shows an ONT that is horizontally placed on a desk. Issue 01 (2022-09-15) Copyright © Huawei Technologies Co., Ltd. - Page 5 Use a screwdriver to fasten the screws into the expansion bolts, reserving 5 mm ends out of the wall, and mount the ONT onto the screws. Issue 01 (2022-09-15) Copyright © Huawei Technologies Co., Ltd.
- Page 6 EchoLife EG8041V5 Quick Start for QR code 1 Placing the Device NO TE It is recommended that the screw be about 4 mm in diameter and longer than 20 mm. Issue 01 (2022-09-15) Copyright © Huawei Technologies Co., Ltd.
-
Page 7: Connecting Cables
EchoLife EG8041V5 Quick Start for QR code 2 Connecting Cables Connecting Cables Issue 01 (2022-09-15) Copyright © Huawei Technologies Co., Ltd. - Page 8 NOTE Reset Huawei ONTs with caution. Otherwise, the ONTs may fail to access the Internet. If an ONT cannot access the Internet after a reset, contact your Internet service provider.
-
Page 9: Indicator Description
The WPS function is disabled. Status Description Status Status The ONT is prohibited by the upper-layer device or blinks abnormally. Contact the Blinks Blinks service provider for help. twice a twice a second second Issue 01 (2022-09-15) Copyright © Huawei Technologies Co., Ltd. - Page 10 The hardware is faulty. every 2 once seconds every 2 seconds NO TE If the ONT is not powered on or the power switch is turned off, all indicators are off. Issue 01 (2022-09-15) Copyright © Huawei Technologies Co., Ltd.
-
Page 11: Technical Specifications
● Dimensions (H x W x D): 30 mm x 168 mm x 115 mm (without external antenna and pads) ● Weight: About 220g ● Maximum system power consumption: 12 W Issue 01 (2022-09-15) Copyright © Huawei Technologies Co., Ltd. -
Page 12: Faqs
How do I log in to the Huawei ONT web page? ● Wireless login Connect your mobile phone, pad, or PC to the Wi-Fi network of the Huawei ONT. Enter the IP address in the address box of a browser and press Enter. On the displayed login page, enter the username and password. - Page 13 ● Wired login Use a network cable to connect a PC to the Huawei ONT. Set the IP address of the PC in the same subnet as the web address of the For example, if the web address of the Huawei ONT is Huawei ONT.
- Page 14 ● Change the initial password after logging in to the web page for the first time. How do I change the Wi-Fi password? Log in to the Huawei ONT web page using your mobile phone, pad, or PC. For details, see "How do I log in to the Huawei ONT web page?"...
- Page 15 2. Wi-Fi speed is affected by the Wi-Fi signal strength and quality. Ensure that the Huawei ONT is far away from interference sources such as TVs, microwave ovens, refrigerators, cordless phones, and Bluetooth devices, and reduce the number of obstacles between the Huawei ONT and Wi-Fi devices (such as pads, mobile phones, and laptops).
- Page 16 How do I restore the Huawei ONT to factory setting? Press Reset by using a needle-type object for longer than 10s to restore factory defaults and reset the Huawei ONT. If the indicator is off and then is lit, the system restarts successfully.
Need help?
Do you have a question about the EchoLife EG8041V5 and is the answer not in the manual?
Questions and answers
No hemos podido configurar está ONU EG8041v5
To configure the Huawei EchoLife EG8041V5 ONU, follow these steps:
1. Power on the device: Ensure the ONT is connected to power and switched on. All indicators will be off if it is not powered.
2. Connect to the ONT:
- Use a mobile phone, tablet, or PC.
- Connect via Wi-Fi or directly through an Ethernet port.
3. Access the web interface:
- Open a web browser.
- Enter the ONT's IP address (commonly 192.168.100.1) in the address bar to access the login page.
4. Login:
- Use the default username and password (commonly "root" or "admin", depending on provider settings).
- If changed, use the updated credentials.
5. Configure settings:
- Set up WAN connection (DHCP, PPPoE, or Static IP based on ISP).
- Configure Wi-Fi settings for 2.4 GHz and 5 GHz (SSID, password, etc.).
- Set LAN IP and DHCP if needed.
6. Save and reboot:
- Save all changes.
- Reboot the device if required for settings to take effect.
Note: Actual web page and login credentials may vary depending on the service provider.
This answer is automatically generated