Table 4-18 Show Logging Flash/Ram - Display Description - SMC Networks TigerSwitch SMC8612T2 Management Manual

C L
OMMAND INE
Example
The following example shows that system logging is enabled, the message
level for flash memory is "errors" (i.e., default level 3 - 0), the message
level for RAM is "debugging" (i.e., default level 7 - 0), and lists one sample
error
Console#show logging flash
Syslog logging: Enable
History logging in FLASH: level errors
[0] 0:0:5 1/1/1 "PRI_MGR_InitDefault function fails."
level: 3, module: 13, function: 0, and event no.: 0
Console#show logging ram
Syslog logging: Enable
History logging in RAM: level debugging
[0] 0:0:5 1/1/1 PRI_MGR_InitDefault function fails."
level: 3, module: 13, function: 0, and event no.: 0
Console#
Field
Syslog logging
History logging in
FLASH
History logging in
RAM
Messages
The following example displays settings for the trap function.
Console#show logging trap
Syslog logging: Enable
REMOTELOG status: enable
REMOTELOG facility type: local use 7
REMOTELOG level type: Debugging messages
REMOTELOG server IP address: 1.2.3.4
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
Console#
4-64
I
NTERFACE

Table 4-18 show logging flash/ram - display description

Description
Shows if system logging has been enabled via the logging on
command.
The message level(s) reported based on the logging history
command.
The message level(s) reported based on the logging history
command.
Any system and event messages stored in memory.