CLI – This example restricts management access for Telnet clients.
Console(config)#management telnet-client 192.168.1.19
Console(config)#management telnet-client 192.168.1.25 192.168.1.30
Console(config)#exit
Console#show management all-client
Management Ip Filter
Http-Client:
Start ip address
-----------------------------------------------
Snmp-Client:
Start ip address
-----------------------------------------------
Telnet-Client:
Start ip address
-----------------------------------------------
1. 192.168.1.19
2. 192.168.1.25
Console#
Port Configuration
Displaying Connection Status
You can use the Port Information or Trunk Information pages to display
the current connection status, including link state, speed/duplex mode,
flow control, and auto-negotiation.
Field Attributes (Web)
•
Name – Interface label.
•
Type – Indicates the port type.
(1000BASE-T or SFP)
•
Admin Status – Shows if the interface is enabled or disabled.
•
Oper Status – Indicates if the link is Up or Down.
•
Speed Duplex Status – Shows the current speed and duplex mode.
(Auto, or fixed choice)
•
Flow Control Status – Indicates the type of flow control currently in
use. (IEEE 802.3x, Back-Pressure or None)
•
Autonegotiation – Shows if auto-negotiation is enabled or disabled.
End ip address
End ip address
End ip address
192.168.1.19
192.168.1.30
P
C
ORT
ONFIGURATION
4-38
4-39
3-79