Dot1X Default; Dot1X Max-Req - SMC Networks TigerSwitch SMC8612T2 Management Manual

C L
OMMAND INE
Default Setting
RADIUS
Command Mode
Global Configuration
Example
Console(config)#authentication dot1x default radius
Console(config)#

dot1x default

This command sets all configurable dot1x global and port settings to their
default values.
Syntax
dot1x default
Command Mode
Global Configuration
Example
Console(config)#dot1x default
Console(config)#

dot1x max-req

This command sets the maximum number of times the switch port will
retransmit an EAP request/identity packet to the client before it times out
the authentication session. Use the no form to restore the default.
Syntax
dot1x max-req count
no dot1x max-req
count – The maximum number of requests (Range: 1-10)
4-106
I
NTERFACE