Configuration Options; Panel Display; Table 3-1 Configuration Options; Figure 3-2 Panel Display - SMC Networks TigerSwitch SMC8612T2 Management Manual

C
ONFIGURING THE

Configuration Options

Configurable parameters have a dialog box or a drop-down list. Once a
configuration change has been made on a page, be sure to click on the
"Apply" button to confirm the new setting. The following table
summarizes the web page configuration buttons.
Button
Revert
help
Apply
Notes: 1. To ensure proper screen refresh, be sure that Internet Explorer
2. When using Internet Explorer 5.0, you may have to manually

Panel Display

The web agent displays an image of the switch's ports. The Mode can be
set to display different information for the ports, including Active (i.e., up
or down), Duplex (i.e., half or full duplex, or Flow Control (i.e., with or
without flow control). Clicking on the image of a port opens the Port
Configuration page as described on page 3-83.
3-4
S
WITCH

Table 3-1 Configuration Options

Action
Cancels specified values and restores current values
prior to pressing "Apply."
Links directly to webhelp.
Sets specified values to the system.
5.x is configured as follows: Under the menu "Tools/Internet
Options/General/Temporary Internet Files/Settings," the
setting for item "Check for newer versions of stored pages"
should be "Every visit to the page."
refresh the screen after making configuration changes by
pressing the browser's refresh button.

Figure 3-2 Panel Display