Enabling Or Disabling Gvrp (Global Setting); Displaying Basic Vlan Information; Figure 3-59 Gvrp Status - SMC Networks TigerSwitch SMC8612T2 Management Manual

Enabling or Disabling GVRP (Global Setting)

GARP VLAN Registration Protocol (GVRP) defines a way for switches to
exchange VLAN information in order to register VLAN members on
ports across the network. VLANs are dynamically configured based on
join messages issued by host devices and propagated throughout the
network. GVRP must be enabled to permit automatic VLAN registration,
and to support VLANs which extend beyond the local switch.
(Default: Disabled)
Web – Click VLAN, 802.1Q VLAN, GVRP Status. Enable or disable
GVRP, and click Apply.
CLI – This example enables GVRP for the switch.
Console(config)#bridge-ext gvrp
Console(config)#

Displaying Basic VLAN Information

The VLAN Basic Information page displays basic information on the
VLAN type supported by the switch.
Field Attributes
• VLAN Version Number
as specified in the IEEE 802.1Q standard.
• Maximum VLAN ID – Maximum VLAN ID recognized by this
switch.
8. Web Only.

Figure 3-59 GVRP Status

8
– The VLAN version used by this switch
VLAN C
ONFIGURATION
4-249
3-147