802.1X Port Authentication; Table 4-31 802.1X Port Authentication Commands - SMC Networks TigerSwitch SMC8612T2 Management Manual

C L
OMMAND INE
Related Commands
shutdown (4-174)
mac-address-table static (4-201)
show mac-address-table (4-203)

802.1X Port Authentication

The switch supports IEEE 802.1X (dot1X) port-based access control that
prevents unauthorized access to the network by requiring users to first
submit credentials for authentication. Client authentication is controlled
centrally by a RADIUS server using EAP (Extensible Authentication
Protocol).
Command
dot1x
system-auth-control
authentication dot1x
default
dot1x default
dot1x max-req
dot1x port-control
dot1x operation-mode
dot1x re-authenticate
dot1x re-authentication Enables re-authentication for all ports IC
dot1x timeout
quiet-period
4-104
I
NTERFACE

Table 4-31 802.1X Port Authentication Commands

Function
Enables dot1x globally on the switch.
Sets the default authentication server
type
Resets all dot1x parameters to their
default values
Sets the maximum number of times
that the switch retransmits an EAP
request/identity packet to the client
before it times out the authentication
session
Sets dot1x mode for a port interface
Allows single or multiple hosts on a
dot1x port
Forces re-authentication on specific
ports
Sets the time that a switch port waits
after the Max Request Count has been
exceeded before attempting to acquire
a new client
Mode Page
GC 4-105
GC 4-105
GC 4-106
IC 4-106
IC 4-107
IC 4-108
PE 4-108
4-109
IC 4-109