Ip Default-Gateway; Show Ip Interface - SMC Networks TigerSwitch SMC8612T2 Management Manual

Related Commands
ip address (4 -283)

ip default-gateway

This command establishes a static route between this switch and devices
that exist on another network segment. Use the no form to remove the
static route.
Syntax
ip default-gateway gateway
no ip default-gateway
gateway - IP address of the default gateway
Default Setting
No static route is established.
Command Mode
Global Configuration
Command Usage
A gateway must be defined if the management station is located in a
different IP segment.
Example
The following example defines a default gateway for this device.
Console(config)#ip default-gateway 10.1.1.254
Console(config)#
Related Commands
show ip redirects (4 -286)

show ip interface

This command displays the settings of an IP interface.
Default Setting
All interfaces
IP I C
NTERFACE OMMANDS
4-285