Show Queue Mode; Show Queue Bandwidth - SMC Networks TigerSwitch SMC8612T2 Management Manual

C L
OMMAND INE
Example
The following example shows how to change the CoS assignments to a
one-to-one mapping.
Console(config)#interface ethernet 1/1
Console(config-if)#queue cos-map 0 0
Console(config-if)#queue cos-map 1 1
Console(config-if)#queue cos-map 2 2
Console(config-if)#end
Console#show queue cos-map ethernet 1/1
Information of Eth 1/1
CoS Value
Priority Queue: 0 1 2 3 4 5 6 7
Console#
Related Commands
show queue cos-map (4 -261)

show queue mode

This command shows the current queue mode.
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show queue mode
Queue mode: wrr
Console#

show queue bandwidth

This command displays the weighted round-robin (WRR) bandwidth
allocation for the eight priority queues.
Default Setting
None
4-260
I
NTERFACE
: 0 1 2 3 4 5 6 7