Combo-Forced-Mode; Shutdown - SMC Networks TigerSwitch SMC8612T2 Management Manual

C L
OMMAND INE

combo-forced-mode

This command forces the port type selected for combination ports 21 - 24.
Use the no form to restore the default mode.
Syntax
combo-forced-mode mode
no combo-forced-mode
mode
Default Setting
sfp-preferred-auto
Command Mode
Interface Configuration (Ethernet)
Example
This forces the switch to use the built-in RJ-45 port for the combination
port 10.
Console(config)#interface ethernet 1/10
Console(config-if)#combo-forced-mode copper-forced
Console(config-if)#

shutdown

This command disables an interface. To restart a disabled interface, use the
no form.
Syntax
[no] shutdown
4-174
I
NTERFACE
• copper-forced - Always uses the built-in RJ-45 port.
• copper-preferred-auto - Uses the built-in RJ-45 port if both
combination types are functioning and the RJ-45 port has a
valid link.
• sfp-forced - Always uses the SFP port (even if a module is not
installed).
• sfp-preferred-auto - Uses SFP port if both combination types
are functioning and the SFP port has a valid link.