Mac-Address-Table Aging-Time; Show Mac-Address-Table Aging-Time - SMC Networks TigerSwitch SMC8612T2 Management Manual

C L
OMMAND INE
Example
Console#show mac-address-table
Interface Mac Address
--------- ----------------- ---- -----------------
Eth 1/ 1 00-00-00-00-00-17
Eth 1/ 2 00-E0-29-94-34-DE
Console#

mac-address-table aging-time

This command sets the aging time for entries in the address table. Use the
no form to restore the default aging time.
Syntax
mac-address-table aging-time seconds
no mac-address-table aging-time
seconds - Aging time. (Range: 10-1000000 seconds; 0 to disable
aging)
Default Setting
300 seconds
Command Mode
Global Configuration
Command Usage
The aging time is used to age out dynamically learned forwarding
information.
Example
Console(config)#mac-address-table aging-time 100
Console(config)#

show mac-address-table aging-time

This command shows the aging time for entries in the address table.
Default Setting
None
4-204
I
NTERFACE
Vlan Type
1 Learned
1 Delete-on-reset