Figure 3-81 Igmp Configuration - SMC Networks TigerSwitch SMC8612T2 Management Manual

• IGMP Version — Sets the protocol version for compatibility with
other devices on the network. (Range: 1-2; Default: 2)
Notes: 1. All systems on the subnet must support the same version.
2. Some attributes are only enabled for IGMPv2, including
IGMP Report Delay and IGMP Query Timeout.
Web – Click IGMP Snooping, IGMP Configuration. Adjust the IGMP
settings as required, and then click Apply. (The default settings are shown
below.)
CLI – This example modifies the settings for multicast filtering, and then
displays the current status.
Console(config)#ip igmp snooping
Console(config)#ip igmp snooping querier
Console(config)#ip igmp snooping query-count 10
Console(config)#ip igmp snooping query-interval 100
Console(config)#ip igmp snooping query-max-response-time 20
Console(config)#ip igmp snooping router-port-expire-time 300 4-279
Console(config)#ip igmp snooping version 2
Console(config)#exit
Console#show ip igmp snooping
Service status
Querier status
Query count
Query interval
Query max response time : 20 sec
Router port expire time: 300 sec
IGMP snooping version
Console#

Figure 3-81 IGMP Configuration

: Enabled
: Enabled
: 10
: 100 sec
: Version 2
M F
ULTICAST ILTERING
4-272
4-276
4-276
4-277
4-278
4-273
4-274
3-185