System Defaults - SMC Networks TigerSwitch SMC8612T2 Management Manual

System Defaults

The switch's system defaults are provided in the configuration file
"Factory_Default_Config.cfg." To reset the switch defaults, this file
should be set as the startup configuration file (page 3-25).
The following table lists some of the basic system defaults.
Function
Console Port
Connection
Authentication
Web Management HTTP Server
SNMP
Table 1-2 System Defaults
Parameter
Baud Rate
Data bits
Stop bits
Parity
Local Console Timeout
Privileged Exec Level
Normal Exec Level
Enable Privileged Exec from
Normal Exec Level
RADIUS Authentication
TACACS Authentication
802.1X Port Authentication
HTTPS
SSH
Port Security
HTTP Port Number
HTTP Secure Server
HTTP Secure Port Number
Community Strings
Traps
S D
YSTEM
Default
auto
8
1
none
0 (disabled)
Username "admin"
Password "admin"
Username "guest"
Password "guest"
Password "super"
Disabled
Disabled
Disabled
Enabled
Enabled
Disabled
Enabled
80
Enabled
443
"public" (read only)
"private" (read/write)
Authentication traps: enabled
Link-up-down events: enabled
EFAULTS
1-7