Configuring Interface Settings - SMC Networks TigerSwitch SMC8612T2 Management Manual

CLI – This example shows the STA attributes for port 5.
Console#show spanning-tree ethernet 1/5
Eth 1/ 5 information
--------------------------------------------------------------
Admin status
Role
State
External path cost
Internal path cost
Priority
Designated cost
Designated port
Designated root
Designated bridge
Fast forwarding
Forward transitions
Admin edge port
Oper edge port
Admin Link type
Oper Link type
Spanning Tree Status : enable
Console#

Configuring Interface Settings

You can configure RSTP and MSTP attributes for specific interfaces,
including port priority, path cost, link type, and edge port. You may use a
different priority or path cost for ports of the same media type to indicate
the preferred path, link type to indicate a point-to-point connection or
shared-media connection, and edge port to indicate if the attached device
can support fast forwarding. (References to "ports" in this section means
"interfaces," which includes both ports and trunks.)
S T
PANNING REE
: enable
: disable
: discarding
: 10000
: 10000
: 128
: 200000
: 128.5
: 61440.0.0000E9313131
: 61440.0.0000E9313131
: enable
: 0
: enable
: enable
: auto
: point-to-point
A C
LGORITHM ONFIGURATION
4-228
3-131