Figure 3-80 Changing Priorities Based On Acl Rules - SMC Networks TigerSwitch SMC8612T2 Management Manual

Web – Click Priority, ACL Marker. Select a port and an ACL rule. To
specify a ToS priority, mark the Precedence/DSCP check box, select
Precedence or DSCP from the scroll-down box, and enter a priority. To
specify an 802.1p priority, mark the 802.1p Priority check box, and enter a
priority. Then click Add.

Figure 3-80 Changing Priorities Based on ACL Rules

CLI – This example changes the DSCP priority for packets matching an
IP ACL rule, and the 802.1p priority for packets matching a MAC ACL
rule.
Console(config)#interface ethernet 1/1
Console(config-if)#match access-list ip bill set dscp 0
Console(config-if)#match access-list mac mike set priority 0 4-147
Console(config-if)#end
Console#show marking
Interface ethernet 1/1
match access-list ip bill set dscp 0
match access-list mac mike set
Console#
C S
LASS OF ERVICE
C
ONFIGURATION
4-168
4-133
4-134
3-181