Spanning-Tree Protocol-Migration - SMC Networks TigerSwitch SMC8612T2 Management Manual

Related Commands
spanning-tree mst cost (4 -225)

spanning-tree protocol-migration

This command re-checks the appropriate BPDU format to send on the
selected interface.
Syntax
spanning-tree protocol-migration interface
• interface
- ethernet unit/port
- port-channel channel-id (Range: 1-6)
Command Mode
Privileged Exec
Command Usage
If at any time the switch detects STP BPDUs, including Configuration
or Topology Change Notification BPDUs, it will automatically set the
selected interface to forced STP-compatible mode. However, you can
also use the spanning-tree protocol-migration command at any time
to manually re-check the appropriate BPDU format to send on the
selected interfaces (i.e., RSTP or STP-compatible).
Example
Console#spanning-tree protocol-migration ethernet 1/5
Console#
- unit - This is device 1.
- port - Port number.
S T
PANNING REE
C
OMMANDS
4-227