Show Lacp; Table 4-45 Link Aggregation Commands - SMC Networks TigerSwitch SMC8612T2 Management Manual

show lacp

This command displays LACP information.
Syntax
show lacp [port-channel] {counters | internal | neighbors | sys-id}
• port-channel - Local identifier for a link aggregation group. (Range:
1-6)
• counters - Statistics for LACP protocol messages.
• internal - Configuration settings and operational state for local
side.
• neighbors - Configuration settings and operational state for
remote side.
• sys-id - Summary of system priority and MAC address for all
channel groups.
Default Setting
Port Channel: all
Command Mode
Privileged Exec
Example
Console#show lacp 1 counters
Port Channel : 1
-------------------------------------------------------------------
Eth 1/ 1
-------------------------------------------------------------------
LACPDUs Sent : 21
LACPDUs Received : 21
Marker Sent : 0
Marker Received : 0
LACPDUs Unknown Pkts : 0
LACPDUs Illegal Pkts : 0
. .
.
L A
INK GGREGATION
C
OMMANDS
4-195