Dot1X System-Auth-Control; Authentication Dot1X Default - SMC Networks TigerSwitch SMC8612T2 Management Manual

Table 4-31 802.1X Port Authentication Commands (Continued)
Command
dot1x timeout
re-authperiod
dot1x timeout tx-period Sets the time period during an
show dot1x

dot1x system-auth-control

This command enables IEEE 802.1X port authentication globally on the
switch. Use the no form to restore the default.
Syntax
[no] dot1x system-auth-control
Default Setting
Disabled
Command Mode
Global Configuration
Example
Console(config)#dot1x system-auth-control
Console(config)#

authentication dot1x default

This command sets the default authentication server type. Use the no
form to restore the default.
Syntax
authentication dot1x default radius
no authentication dot1x
Function
Sets the time period after which a
connected client must be
re-authenticated
authentication session that the switch
waits before re-transmitting an EAP
packet
Shows all dot1x related information
A
UTHENTICATION
C
OMMANDS
Mode Page
IC 4-110
IC 4-111
PE 4-111
4-105