Figure 3-33 Acl Mask Configuration - Mac - SMC Networks TigerSwitch SMC8612T2 Management Manual

C
ONFIGURING THE
Web – Configure the mask to match the required rules in the MAC ingress
or egress ACLs. Set the mask to check for any source or destination
address, a host address, or an address range. Use a bitmask to search for
specific VLAN ID(s) or Ethernet type(s). Or check for rules where a
packet format was specified. Then click Add.
3-74
S
WITCH

Figure 3-33 ACL Mask Configuration - MAC