Table 4-34 Egress Queue Priority Mapping - SMC Networks TigerSwitch SMC8612T2 Management Manual

Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
• You must configure an ACL mask before you can map CoS values to
the rule.
• A packet matching a rule within the specified ACL is mapped to one
of the output queues as shown in the following table. For information
on mapping the CoS values to output queues, see queue cos-map on
4-259.
Priority
Queue
Example
Console(config)#interface ethernet 1/10
Console(config-if)#map access-list ip bill cos 0
Console(config-if)#
Related Commands
queue cos-map (4-259)
show map access-list ip (4-132)

Table 4-34 Egress Queue Priority Mapping

0 1 2
1 2 0
A C
CCESS ONTROL
3 4
3 4
L C
IST OMMANDS
5 6 7
5 6 7
4-131