Table of Contents
Advertisement
C
I
ONSOLE
NTERFACE
MAC Address Configuration Menu
Use the MAC Address Configuration menu to statically bind MAC
addresses to a specific port or to filter MAC addresses from the system.
Menu
Static MAC Addresses
Filtering MAC Address
Note: Multicast filtering can only be configured from the Web interface.
(See "Configuring Multicast Filtering" on page 3-21.)
Setting Static Addresses
When you configure static MAC addresses, traffic sent from devices listed
in the static address table will only be accepted on the specified interface.
Static addresses remain in the switch's address table, regardless of whether
the device is physically connected to the switch. This saves the switch from
having to re-learn a device's MAC address when the disconnected or
powered-off device becomes active on the network again.
4-26
TigerSwitch 10/100 :
=====================
Static MAC Address
Filtering MAC Address
Previous Menu
Return to main menu.
Arrow/TAB/BKSPC = Move Item
Description
Sets entries for address, port number, and
VLAN identifier
Filters specified addresses
MAC Address Configuration
Enter=Select Item
Page
4-26
4-28
Advertisement
Table of Contents
