Auto Datalogging Function Operation - PCE Instruments PCE-360-ICA Instruction Manual

5-9 Auto Datalogging Function Operation

1. Clear SD Card memory data:
 Press
 Press and hold down the "MEMORY" key then press
on the meter and to enter clear manual memory data mode, the "DATA M
CLr 1 YES no" mark is displayed.
 Press  key to enter clear SD Card memory data mode, the "DATA M
CLr 2 YES no" mark is displayed.
 Press  or  key to select "YES" or "no" then press  key to confirm.
If select "YES", the all SD Card memorized data is cleared.
2. Store Auto datalogging data to memory:
 Setting the current time and Auto datalogging interval time.
 Press "SET" key to enter current time setting mode.
 Press   keys to set actual current YEAR-month, DAY-hour,
minute-second.
 Press  key to enter auto datalogging interval time setting, the "INTV"
annunciator is displayed.
 Press  keys cycle select the interval time, you can select 5 seconds,
10 seconds, 30 seconds, 1 minute or 2 minutes.
 Press  key to exit TIME setting mode.
key to turn off the meter.
User Manual
51
key again to turn