PCE Instruments PCE-360-ICA Instruction Manual page 34

•
If possible, before connecting the voltage test leads and current
probe to the electrical equipment to be tested, take off the electrical
equipment's power.
 Connect the black voltage test alligator to the Neutral Line "N".
 Connect the red voltage test alligator to the Line "A".
 Press I1 current probe trigger to open the jaw and fully enclose the Line
"A".
 If you want to measure ground leakage current, press I4 current probe
the trigger to open the jaw and fully enclose the Ground Line "G".
5. Frequency (Hz), Phase Angle (Θ), Ground Leakage Current (I4) and Power
Factor (PF) measurement :
 Press "PFΘ" key to cycle shows the PF and Θ measured values.
 Press "Hz I4" key to cycle shows the Hz and I4 measured values.
6. Voltage and Current THDR THDF measurement:
Please refer to section 4-1-12 "THD" key description.
7. Voltage and Current waveform harmonic measurement:
Please refer to section 4-1-25 "
8. Power Maximum/Minimum measurement:
Please refer to section 4-1-10 "MAX" key description.
User Manual
CAUTION
MAG." key description.
33