Table of Contents
Advertisement
RS232 Default Settings When RS-232 communication enabled, the default
RS-232 settings are:
-
Baud Rate 19200
-
Parity None
-
Data bits 8
-
Stop bit 1
7-1 HARDWARE REQUIREMENTS AND SETUP
PC HardWare Requirements :
HDD, CD Rom, 486 PC or above, with an available COM port
EGA or higher monitor
4M bytes or more memorysize
PC HardWare Setup :
1) Switch off all power related to the PC
2) Connect the DB9 (female) end of the supplied RS-232 cable to
available COM port
3) Switch on all related power
4) Connect the fiber end of the supplied RS-232 cable to the meter
User Manual
57
Advertisement
Table of Contents
